Nurse Call Systems

Call Aid UK are one of the UK’s most popular suppliers and installers of both wired and wireless Nurse Call Systems.

Please do not hesitate to contact us for a quotation. It is always helpful if you are able to forward us marked up floor plans and a specification for your project.

All systems are available either wired, wireless, or a combination of both.

1103RX Master Panel

1103 Series

Receives calls & alerts, with the call location displayed on the alphanumeric digital display. Patient calls to the 1103 display panel will respond by showing the room/user name and a low level tone will be sounded. Staff panic calls will start a high level sounder.

  • Size (mm) 195 L x 151 W x 48 D
  • RS232 output to separate pager transmitter
  • OLED display
  • Range up to 150 metres, depending on the structure of the building. Greater range is available by using radio repeaters

1142RX Master Panel

1142 Series

The 1142 Series nurse call system is the ideal system for smaller Nursing & Residential Homes. It is simple to install for a competent DIY person or electrical contractor. Patient calls to the 1142 display panel will respond by showing the room/user name and a low level tone will be sounded. Staff panic calls will start a high level sounder.

  • Size (mm) 195 L x 151 W x 48 D
  • ‘Cancel at source’ or ‘cancel at panel’ system
  • ‘Call Nurse’ or ‘Call Assist’

1150 Nurse-Assist Unit with Pull Socket

Nurse/Assist Button Standard Unit

Available radio or wired. Can be supplied with a pull cord and triangle. The internal reassurance lamp confirms that a call has been sent.

  • Size (mm) 85 L x 85 W x 22 D
  • Standard Unit P/No. A5531
  • With Phono Socket P/No. A5529
  • With Pull Cord P/No. A5530

1123 Wired-Radio Call-Reset Unit

Wired/Radio Call/Reset Unit

The 1123 radio transceiver wall unit can be fitted to toilets or other areas where the disabled are at risk. All versions are powered by a separate 12V power supply unit which plugs into a 240 Volt wall socket/fuse spur. This versatile unit can also act as a transceiver, allowing it to receive calls from a nearby 1122 portable panic button (PPB). The 1123 will then transmit to and alert the master panel, which then displays the 1123 locations and ID of the activated 1122 PPB.

This unit can also be connected to wired accessories such as our 1110 wired over door lamp and 1114 wired ceiling mounted pull switch. The internal reassurance lamp confirms that a call has been sent.

  • Size (mm) 85 L x 85 W x 22 D

Ceiling Mounted Pull Switch

1124 Wired Ceiling Mounted Pull Switch
The ceiling mounted pull switch can be wired or battery powered. The lens is unclipped to access the battery.

The internal reassurance lamp confirms that a call has been sent.

Available with either a clear or red lens.

  • Size (mm) 86 L x 86 W x 60 D

1122 Single Channel portable receiver

Portable Radio Panic Button (PPB)

This small unit is suitable for staff working away from fixed panic buttons and clips onto a belt or pocket. The 1122 PPB is powered by 2 x AAA batteries and has a low battery alert function.

  • Size (mm) 95 L x 46 W x 25 D

1122P Portable Belt Pull Radio Panic Button

Portable Belt Pull Radio Panic Button

For high security premises there is a leather belt strap version. The body of the unit is grabbed and pulled to activate a panic call.

The 1122P is powered by 2 x AAA batteries and benefits from the low battery alert function.

  • Size (mm) 95 L x 46 W x 25 D excl. strap

1115P Portable Panic Button with Lanyard

Pendant Nurse Call Button with Lanyard

This battery powered pendant button comes with a lanyard, so can be worn around the neck.

The 1115P is powered by 1 x CR2032 battery.

  • Size (mm) 85 L x 48 W x 15 D
1115W Portable Wrist Strap Panic Button

Nurse Call Wrist Strap Button

This battery powered nurse call button comes with an elasticated wrist strap with Velcro fastening.

The 1115W is powered by 1 x CE2032 battery.

  • Size (mm) 70 L x 45 W x 20 D excl. strap.
1123R Radio Signal Repeater & Transceiver

Radio Signal Repeater & Transceiver

The 1123R is a mains powered unit and is used to extend radio signal coverage. It may also be required if radio ‘black spots’ are a problem due to building structure or location of the transmitters/receivers.

  • Size (mm) 220 L x 140 W x 40D

pdf-iconDownload the 1103 Wired Nurse Call System PDF

pdf-iconDownload the 1103RX Radio Nurse Call System PDF

pdf-iconDownload the 1142 Wired Nurse Call System PDF

pdf-iconDownload the 1142RX Radio Nurse Call System PDF